HOW TO USE YOUR DIY LIP BALM KIT

Thanks so much for buying a kit from us! Please follow the instructions below to make your lip balm and remember when microwaved…

JAR & CONTENTS WILL BE HOT!

1. Place a towel or aluminum foil on the surface you’ll be using to work. We recommend doing this right next to your microwave.

2. Remove lip balm tubes from box.

3. Remove caps from lip balm tubes and set aside.

4. Stand up lip balm tubes on work surface.

5. Remove pipette (dropper) and stirring stick form box and set on work surface.

6. Remove glass jar from box (this contains your pre-portioned ingredients).

7. Carefully remove lid from glass jar (contents may be partially liquified from shipping in heat).

8. Add 1 Tablespoon of olive oil to the jar.

9. Place jar uncovered in microwave for 1min (this was tested in a 1,100 Watt microwave and should yield similar results in most microwaves between 1,000 - 1,200 Watts).

10. Carefully remove jar from microwave with oven mitt or other thermal protection . JAR & CONTENTS WILL BE HOT.

11. If there are a few bits of beeswax which have not yet melted, stir for a few seconds with the provided wooden stirring stick and these should melt.

12. If you want scented lip balm, add 15-30 drops of your preferred SKIN SAFE essential oil, depending on potency of the scent. Stir for 2-3 seconds with provided wooden stirring stick.

13. Use the provided plastic pipette to suck up the melted lip balm mixture and carefully squirt into each tube until you reach the top. The contents of your jar should be sufficient to fill all of the tubes in your order. Any additional contents not re-solidified can be used to refill the tubes as the contents contract with cooling.

14. Let tubes rest for at least 30mins.

15. Re-apply caps, share and enjoy!